Charger Indication
Description
Blinking amber
Battery is in standby mode waiting to be charged.
NOTE:
Battery might be too hot, too cold or
low voltage.
2.3
Combining the Multi-Unit Chargers
Prerequisites:
The maximum unit of multi-unit charger that can be combined is four.
Procedure:
1
Place the chargers on the table for support before combining them.
2
To extend the connector, press and push the male connector latch to the left.
3
To combine the chargers, connect the male connector to the female connector.
The magnets of the chargers stick together magnetically.
4
Hold the sides of the combined chargers when moving to another location.
MN007338A01-AE
Chapter 2 : Charger Operations
12
