Chapter 2
Charger Operations
This sections contains the charging information of your charger.
2.1
Charging the Batteries
Prerequisites:
Charge your Motorola Solutions Authorized Batteries best at room temperature with the
assigned power supply to the supported models.
Procedure:
1
Place the multi-unit charger on a flat surface.
NOTE:
If you have more than one multi-unit charger, it is recommended to place the
multi-unit charger in a vertical position mounted to the mounting bracket.
2
Insert the power supply adapter to the female connector of the multi-unit charger.
3
Plug the power supply adapter to the power outlet.
If powering up the multi-unit charger is successful, the LED shows green for one second.
If powering up the multi-unit charger is unsuccessful, check the power cord connection.
4
To insert the battery into the charger pocket, align the battery on the rail of the charger pocket.
5
Make sure the battery is in contact with the charger contact.
If the battery is inserted correctly, the LED indicator shows solid red.
6
To remove the battery from the charger pocket, pull the battery out from the charger pocket.
2.2
Charging Indications
Table 6: Charging Indications
Charger Indication
Description
Solid green for 1 second
Charger power up successfully.
Solid red
Battery is charging rapidly.
Blinking green
Battery is charged up to 90% or more.
Solid green
Battery is nearly charged or fully charged.
Blinking red
Battery is at fault.
NOTE:
Remove and re-insert the battery to
the charger pocket.
MN007338A01-AE
Charger Operations
11
