VEHICULAR C
HARGER PML
N
6716_
English
39
Swivel Clip Position When Placing Onto Vehicular Charger
The Vehicular Charger will accommodate for both swivel clips:
•
Standard swivel clip (PMLN6743_) – Any rotational position
•
D-ring swivel clip (42009312001) – Horizontal position
Rotate D-ring swivel clip to horizontal position before inserting the
WRSM or battery into the Vehicular Charger.
Figure 5.7: Swivel Clip Position
LED Light Indication
When troubleshooting, always observe the color of the LED.
Horizontal
Table 5.3: Charging Status
LED Indication
Charger State
Steady Green
Charged at least 95%
Steady Red
Rapid charge
Single Flash Green
Charged successfully powered up and is ready
for use
Slow Flash Green
Nearly charged at least 90%
Slow Flash Amber
Battery under voltage recovery
OR
Battery temperature is either too hot or too cold
–
Wait to charge
If battery temperature is within operating
temperature, there may be a fault connection
–
DO NOT charge battery
MN0001065A01_en.book Page 39 Tuesday, March 10, 2015 2:03 PM
