20
Using the Phone
3.14.3
Three-party conference call
1.
During an external call, press
INT
. Your caller is put on hold.
2.
Press
VOL+
or
REDIAL/VOL-
to select the handset you want to call.
3.
Press
MENU
to call the handset.
4.
When the other handset answers the intercom call, press
MENU
on the calling
handset to set up the conference call.
5.
Press
/BACK
on any handset to end a three-party conference call and leave the
other handset engaged with the caller.
NOTE
During an external call, pressing
/FLASH
or
/SPEAKER
on any handset will join in
the call and set up a conference call.
3.15
Setting the dial mode
The default dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
SETUP BS
.
2.
Press
MENU
to select
DIAL MODE
.
3.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
TONE
or
PULSE
.
4.
Press
MENU
to save.
NOTE
If the pulse mode is selected, press
TONE/*
to switch from pulse to tone dialing temporarily
when dialing out. After the call is ended, the dial mode will change back to pulse.
3.16
Setting the flash time
The default flash time is
600MS
. It is unlikely that you should need to change this setting unless
advised to do so.
1.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
SETUP BS
.
2.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
FLASH TIME
.
3.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to the flash time you want.
(8 options are available :
90
,
100
,
110
,
250
,
300
,
400
,
600
and
700MS
)
4.
Press
MENU
to save.
3.17
Setting the area code
1.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
SETUP BS
.
2.
Press
MENU
and then
VOL+
or
REDIAL/VOL-
to select
AREA CODE
.
3.
Press
MENU
and then enter the area code.
4.
Press
MENU
to save.
