Display Assembly (LCD and Touch Screen) and Motherboard
Nexus 6 – Disassemble Guide
Page
9 of 11
http://www.fixez.com/
Locate and remove the T4 torx screw and small metal
bracket that secure the motherboard to the Nexus 6
LCD Assembly.
14.
Locate and remove the piece of kapton tape that
covers the touch screen digitizer connection.
Next, use the nylon spudger to lift the clasp up and
slide the ribbon cable out of the connection. Gently pry
up the digitizer ribbon cable from the motherboard.
Now, remove the piece of kapton tape that covers the
LCD connection, it is located on the left side of the
motherboard. With the nylon spudger, lift the clasp up
and slide the ribbon cable out of the connection.
You can now carefully separate the motherboard from
the display assembly. Make sure to maneuver the
motherboard around the touch screen digitizer and
LCD ribbon cables when separating it from the display
assembly.
(pictures continued on next page)
15.
