manualshive.com logo in svg

Motorola MVME760, User Manual, Page: 3 / 48

Share
Download
Motorola MVME760 User Manual Download Page 3

Preface

The MVME760 User’s Manual provides general information, hardware
preparation, installation instructions and support information for the MVME760
Transition Module.

The MVME760 module is used as the interface between host VMEmodules and
various peripheral devices. A ribbon cable is used to connect the MVME760
Transition Module to the host VMEmodule.

This manual is intended for anyone who wants to design OEM systems, supply
additional capability to an existing compatible system, or for use in a lab
environment for experimental purposes.

A basic knowledge of computers and digital logic is assumed.

To use this manual you should be familiar with the publications listed in the
following section: Related Documentation.

Related Documentation

The Motorola publications listed below are referenced in this document. If not
shipped with this product, manuals may be purchased by contacting your local
Motorola sales office.

Document Title

Motorola

Publication

Number

MVME1603/MVME1604 Single Board Computer Installation and Use V1600-1A/IH
MVME1603/MVME1604 Single Board Computer Programmer’s
Reference Guide

V1600-1A/PG

MVME1603/MVME1604 Support Information

V1600-1A/SC

PM603/PM604 Processor/Memory Mezzanine Module User’s Manual PM603A/UM
PPCBug Debugging Package User’s Manual (Parts 1 and 2)

PPCBUGA1/UM
PPCBUGA2/UM

PPC1Bug Diagnostics Manual

PPC1DIAA/UM

SIM705 Serial Interface Module Installation Guide

SIM705A/IH

Summary of Contents for MVME760

















































Reviews:

No comments