Motorola MVME177P, Installation And Use Manual

Page: 63 / 108

Modifying the Environment
http://www.motorola.com/computer/literature 3-15
3
Slave Address Translation
Address #1 00000000 This register allows the VMEbus address and
the local address to differ. The value in this
register is the base address of the local resource
that is associated with the starting and ending
address selection from the previous questions.
Default is 0.
Slave Address Translation Select
#1 00000000 This register defines which bits of the address
are significant. A logical "1" indicates
significant address bits, logical "0" is non-
significant. Default is 0.
Slave Control #1 03FF Defines the access restriction for the address
space defined with this slave address decoder.
Default is $03FF.
Slave Enable #2 [Y/N] N Do not set up and enable Slave Address
Decoder #2.
Slave Starting Address #2 00000000 Base address of the local resource that is
accessible by the VMEbus. Default is 0.
Slave Ending Address #2 00000000 Ending address of the local resource that is
accessible by the VMEbus. Default is 0.
Slave Address Translation
Address #2 00000000 Works the same as Slave Address Translation
Address #1. Default is 0.
Slave Address Translation Select
#2 00000000 Works the same as Slave Address Translation
Select #1. Default is 0.
Slave Control #2 0000 Defines the access restriction for the address
space defined with this slave address decoder.
Default is $0000.
Master Enable #1 [Y/N] Y Yes, set up and enable Master Address
Decoder #1.
Master Starting Address #1 02000000 Base address of the VMEbus resource that is
accessible from the local bus. Default is the
end of calculated local memory (unless
memory is less than 16MB; then this register is
always set to 01000000).
Master Ending Address #1 EFFFFFFF Ending address of the VMEbus resource that is
accessible from the local bus. Default is the
end of calculated memory.
Table 3-3. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default