Motorola MTP830 User Manual Download Page 69

Page: 69 / 108

• The PTT button
• Side buttons
• The

ROTARY

KNOB

• The ON/OFF/END/HOME key

The EMERGENCY button is always operative.

Related Links

Locking/Unlocking the Keys/Buttons

on page 29

Keypad Lock Notification

When the keypad is locked, your service provider can configure one of the following instructions:

• None — no notification is displayed.
• Notification Only —

Keys Locked

is displayed.

• Notification and Instruction —

Press Menu + Left to lock/unlock keypad

is displayed.

Setting Automatic Keylock Delay

Procedure:

From the home screen, press the

key.

Select

Security

→

Keylock Setup

→

Delay

Use up and down N

AVIGATION

keys to change the minutes and press

Done

Setting Keylock on Startup

Procedure:

From the home screen, press the

key.

Select

Security

→

Keylock Setup

→

Start Locked

Select

Off

Air Encryption

Air Encryption is a feature that enables encryption of entire communication between the radio and infrastructure,
which results in increased security of calls, messages, and data.

If configured by your service provider, the radio plays a sound and displays

Call & Data Not Encrypted

when

encryption is on and you receive a clear call (unencrypted). This feature provides service confidentiality between you
and the system.

In the TMO Mode, when Air Encryption is enabled on you radio but cannot be supported due to an infrastructure

failure, the following icon appears on the display:

.When encryption is not available in the DMO Mode, the radio

displays:

This menu item allows you only to view air encryption state.

Note:

This is a selling feature.

Related Links

Status Icons

on page 25

Main Menu |

| |

Send Feedback

Summary of Contents for MTP830












































































































Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands

Motorola MTP830, User Manual

Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands