Motorola MTP3150 Feature User Manual Download

Page: 91 / 144

The Volume Control Mode is configurable using the Customer Programming Software (CPS).

You can configure the maximum volume offsets (dB) and the volume range (dB) through CPS. The
field is

Audio Settings

→

User Profile

. The volume control in the radio is divided into 13 steps, from 0

to 14. If for example, the

vol. range

is set to 39, each step on the volume indication bar is 3 dB.

4.7.5.4.1

Setting Volume Adjustment Mode

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Audio

→

Volume Adj. Mode

Select one of the following options:

•

Individual

– You can set Duplex, Simplex, Earpiece, Speaker, and Keypad per your

preferences in

Menu

→

Setup

→

Set Volume

•

Common

– You can set one value for all the items in

Menu

→

Setup

→

Set Volume

4.7.6

Tones

This field sets the volume level for the tones set.

NOTICE:

The radio has two tone packs: Classic Tones (default) and New Tones. Your service

provider decides which tone pack is enabled.

4.7.6.1

Keypad Tone

You can activate/deactivate keypad tone at every key press.

4.7.6.1.1

Setting Keypad Tone

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Tones

→

Keypad Tone

Select one of the following options:

•

– Activates keypad tone.

•

Off

– Deactivate keypad tone.

4.7.6.2

All Tones

You can activate/deactivate all tones.

4.7.6.2.1

Setting All Tones

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Tones

→

All Tones

68015000797-EH

Chapter 4: Main Menu

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands