Motorola MTM800E Feature User Manual Download

Page: 21 / 206

Gett

ing S

tar
ted

Data Connected

Displayed when the MTM800E is successfully
connected to an external device and ready for data
transfer.

Data Transmit/Receive

Displayed when the MTM800E is transferring data to/
receiving data from the external device (laptop or
desktop PC).

No number

– standby data session.

Number 1, 2, 3, or 4

– indicates active data session

with 25%, 50%, 75%, or 100% bandwidth.

Direct Mode Operation

Signal Strength (DMO)

Indicates an incoming Direct Mode Group Call.

Direct Mode

Displayed when the MTM800E is in Direct Mode.

DMO Gateway

Indicates that gateway is selected. The icon has three
states:

Solid

– while the MTM800E is synchronised with the

gateway.

Flashing

– while the MTM800E is not synchronised

or during attachment.

No icon

– during a terminal to terminal and repeater

call.

DMO Repeater

Displayed when the repeater option in DMO is
selected. This icon has three states:

Solid

– while the terminal has detected the repeater

(i.e., when the terminal receives a presence signal).

Blinking

– while the terminal has not detected the

repeater or during attachment.

No icon

– during a terminal to terminal and gateway

call.

Status

Icon

Description

Summary of Contents for MTM800E















































































































































































































Search results

Summary of Contents for MTM800E

Reviews:

Related manuals for MTM800E

Brands by name

Popular brands

Motorola MTM800E, Feature User Manual

Search results

Summary of Contents for MTM800E

Reviews:

Related manuals for MTM800E

Brands by name

Popular brands