Motorola MTM800E, Feature User Manual

Page: 187 / 206

179
W
h
a
t to
d
o
if
..
.
What to do if...
Your MTM800E flashes the following messages:
Messages Message Description
...-Rcvd Call received but not answered, or rejected.
Attachment
Failed The MTM800E could not perform talkgroup attachment.
The MTM800E keeps on trying. If it does not succeed,
try another talkgroup.
Authenticate
Failure The MTM800E could not register on an Authenticated
system (for example, the Authentication key is incorrect,
or Authentication is disabled in the MTM800E).
Call Cancelled Called MTM800E cancelled the call.
Call Ended • Faulty channel. Please try later.
• Called MTM800E ended the call.
Call Preempted Channel being used for priority.
Emgcy In Use:
Wait For Mic The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency
Call on the same talkgroup. The MTM800E microphone
is not active during this time, but the MTM800E will
automatically try to regain talk permit after a
predetermined time.
Emgcy Mic
Ended The Hot Microphone timer has automatically expired, or
the user has pressed the PTT button to cancel the Hot
Microphone feature.
Emgcy Mic On The Hot Microphone feature is active, and the
MTM800E is automatically transmitting hands free
emergency audio.
Empty Entry The speed number you dialled does not exist, or the
number exists but the group is non-selectable.
Faulty Unit
Error... Self-test failed. An operational fault has been detected
with your MTM800E. Record the error number. Turn
your MTM800E off and contact service.