27
En
g
lis
h
Getting Started
Powering On/Off (On-Off/End/Home Key or Rotary
Knob Push Button)
To power
On
, press and hold
, or press the rotary knob push
button. Your MTM800 Enhanced performs a self-check and
registration routine. After successful registration, the MTM800
Enhanced is in service.
To power
Off
, press and hold
. You will hear a beep and the
Powering Off
message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power
On
. The MTM800
Enhanced will power
On
in Emergency Mode or in standard mode
(as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio Frequency (RF) sensitive area. To activate
this feature, press
Menu
and
select
More...
> Networks
> TXI Mode
> Activate
.
The TXI Mode remains active at power
On
. You will be asked
whether to leave the TXI Mode
On
or not.
Press the
Yes
soft key to deactivate the TXI Mode. If the MTM800
Enhanced was previously used in Trunked Mode, it will register to
the network. If the MTM800 Enhanced was previously used in Direct
Mode, it will remain in Direct Mode. Press
No
in Trunked Mode and
the MTM800 Enhanced powers down; press
No
in Direct Mode and
you remain in Direct Mode with TXI selected.
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the MTM800
Enhanced to transmit immediately. The MTM800
Enhanced must
NOT
be within the RF sensitive
area when entering Emergency Mode.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.