29
En
glish
Attaching the Antenna
Insert the bottom of the antenna into the screw-in base on the top of
the MTH800
L
. Turn clockwise until snug.
Do not force.
Powering On/Off (On
-
Off/End/Home Key)
To power
On
, press and hold
. Your MTH800
L
performs a self-
check and registration routine. After successful registration, the
MTH800
L
is in service.
To power
Off
, press and hold
. You will hear a beep and the
Powering Off
message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power
On
. The MTH800
L
will power
On
in Emergency Mode or in standard mode
(as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio Frequency (RF) sensitive area. To activate
this feature, press
and
select
More... > Networks > TXI Mode >
Activate
.
Turn the MTH800
L
Off before installing or removing the antenna.
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the
MTH800
L
to transmit immediately. The MTH800
L
must
NOT
be within the RF sensitive area when
entering Emergency Mode.
MENU