Applications
4-3
4
Applications
PCI and PMC Adapter
Table 4-3. Application Problems
Problem
Possible Solution
A Windows NT
application no
longer works
If the application program worked prior to the
installation of the adapter, there is probably a
hardware conßict.
It is possible that some programs which access
the hardware can cause a conßict at some point.
This is typically associated with hardware such
as printers and modems. If you suspect a
hardware conßict, check the PCI conÞguration
that came with your system to resolve the
conßict.
Table 4-4. PCI and PMC Adapter Problem
Problem
Possible Solution
Host adapter not
found
The PCI system in your computer is suppose to
automatically configure the bus address
locations. An address conflict is probably not
the problem. If the driver is correctly installed,
a driver message should appear on the screen
during boot-up of your computer.
1. Make sure the adapter card is seated correctly in
the bus expansion slot.
2. Check for correct configurations of the SCSI bus
cable. A broken wire or inverted wiring can
cause SCSI reset problems.
