Back
Next
Menu
More
Connect & transfer
Connect & transfer
Quick start: connect & transfer
Virtual Private Networks (VPN)
Wireless sound system
Connect up to four Bluetooth devices for a wireless stereo
sound system.
Turn Wireless sound system on/off
Find it:
swipe up
>
Settings
>
Wireless Sound
System
, then tap the switch to turn it on.
Connect devices
The
first time
you connect a device, follow these steps:
1
Make sure the device you are pairing with is in
discoverable mode (for details, refer to the guide that
came with the device).
2
Swipe up
>
Settings
>
Wireless Sound System
and tap the switch to turn it on.
3
If the device isn't appearing, tap >
Refresh
.
4
Tap a found device to connect it (if necessary, tap
PAIR
or enter a passkey such as
0000
).
Tip:
Tap
to rename the device or define its type.
Manage devices
• To manually reconnect your phone with a paired device,
tap the device name in the list.
• To manually disconnect your phone from a paired device,
tap the device name in the list, then tap
OK
.
• To remove a paired device, tap
next to the device
name, then tap
FORGET
.
Note:
connection limited to only 1 audio device when phone
is connected to 2.4 GHz Wi-Fi network.
Adjust volume
To adjust volume, swipe up
>
Settings
>
Wireless
Sound System
> tap
and drag the slider left or right for
each connected device.
Tip:
you can also press the side volume buttons or press a
volume key and tap
, then drag the slider left or right.
Calibrate devices
Synchronise your speakers for the best sound.
Note:
before starting, ensure that you are in a quiet
environment and all speakers are close to your phone.
1
Tap
to start the calibration tool.
2
Wait for the calibration to complete.
Set up your stereo system
For a true stereo experience, try these tips.
1
Set up your speakers so that they are facing you and are
equidistant from you.
2
Tap >
Stereo system
.
3
Optionally, select the left or right channel. (By default,
both are selected.)
