1. Turn the hotspot off.
2.
3. Turn the hotspot back on to continue using it.
If you’re experiencing performance issues, you can limit the number of connections allowed or temporarily
disconnect devices.
1. Go to
> Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot > Advanced > Manage devices.
3. Do any of the following:
•
To limit number of devices allowed, touch Device limit.
•
To temporarily disconnect devices until your next hotspot session, under Connected devices, touch
the device's name > Disconnect. The device will remain unable to connect until you turn off and
restart the hotspot.
To allow only specified devices to connect:
1. Get the MAC addresses of the devices you want to allow to connect. (Connect devices to the hotspot
normally, then go to Manage devices, and touch the name of each connected device to view its MAC
address.)
2. Touch Manage allowed devices > Add allowed device.
3. For each device, enter the MAC address and device name.
4. Once you add allowed devices, they are saved unless you delete them, and you can turn this feature on
and off by checking or unchecking Allow all devices any time.
To restrict access for a previously allowed device, touch the device name, then touch Delete.
View or change hotspot password
1. Go to
> Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. To see the current password, touch Hotspot password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that
. If cellular data is off, your phone doesn't have an internet connection to
share.
2.
your phone to your computer with a USB cable.
4. Touch Network & internet > Hotspot & tethering.
Settings : Network and internet
120
Summary of Contents for moto g52j 5G
Page 1: ...User Guide ...