5.
Launch the ML User Application.
6.
Select the RF Pass-through option available in the MLUA.
7.
Before the RF Pass-through User Control in MLAA is changed to
[Enable]
, the RF
Pass-Through Control will be grayed-out.
8.
After the RF Pass-through User Control in MLAA has been set to
[Enable]
, the default setting
will be
[Automatic Selection]
.
9.
User can select
[Manual Selection]
to either Enable or Disable the RF Pass-Through.
[Apply]
needs to be pressed by User in order to make the selection valid.
10.
Enabling the RF Pass-Through will disable the Internal Antenna and vice versa.
1 2
3 4
20
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
