Motorola MK4000 MicroKiosk, Product Reference Manual

Page: 119 / 136

Wireless Configuration B - 51
Registry Settings
Use a registry key to modify some of the parameters. The registry path is:
HKLM\SOFTWARE\Symbol Technologies, Inc.\Configuration Editor
Log On/Off Application
When you launch the
Log On/Off
application, the device may be in one of two states: either you are logged onto the
device by already entering credentials through the login box, or you are not logged on. Each state has a separate
set of use cases and a different look to the dialog box.
User Already Logged In
If already logged into the device, you can launch the login dialog box for the following reasons:
•
Connect to a different profile.
•
Connect to and re-enable a cancelled profile. To do this:
•
Launch the
Log On/Off
dialog.
•
Select the cancelled profile from the profile drop-down list.
•
Login to the profile.
•
Log off the device to prevent another user from accessing the current user’s network privileges.
•
Switch device users to quickly log off the device and allow another user to log into the device.
Table B-29
Registry Parameter Settings
Key Type Default Description
CertificateDirectory REG_SZ \\ Application The default directory to find certificates.
EncryptionMask REG_DWORD 0x0000001F Defines the supported encryption types. This is a bitwise
mask with each bit corresponding to an encryption type.
1 = Type is supported
0 = Type is not supported
Bit Number Encryption Type
0 None
1 40-Bit WEP
2 128-Bit WEP
3 TKIP
4 AES (Fusion 2.5 and above only)
NOTE
Re-enable cancelled profiles using the Manage Profiles window to connect to the cancelled profile.