Motorola MK1200, Product Reference Manual

Page: 131 / 232

System Features 7 - 11
FTP Server
The MK1200 supports the minimum implementation of the FTP server defined in RFC 959, which includes
configuration values, transfer parameters, and supports only ASCII and image data types.
The FTP server is enabled by default. Use the RDM utility FTP Server feature (
Update/FTP Server
) to set up the
FTP server. See page 3-19 .
FTP Server Registry Parameters
•
Allow Anonymous - This parameter determines whether to provide anonymous access to users for copying
data from MK1200. When enabled, users do not need an account on the local machine.
•
Allow Anonymous Upload - Use this parameter to enable/disable anonymous users to copy data to the
MK1200.
•
FTP Enable Part I - This parameter determines whether the FTP server is loaded/accessible when the
MicroKiosk is powered on. Disabling this does not affect the RDM’s ability to load or retrieve mkconfig.reg
files using the
Push Configuration File
and
Retrieve Remote Configuration File
options respectively.
•
FTP Enable Part II - Enabling this parameter allows the RDM to load/retrieve a mkconfig.reg file even if the
MicroKiosk FTP server is disabled (FTP Enable Part I = disabled). If both FTP Enable Part I and FTP Enable
Part II parameters are disabled, you cannot load the mkconfig.reg file remotely using the RDM or FTP.
However, you can load the mkconfig.reg file locally using an ActiveSync connection or a PC card.
•
Root Directory - Use this parameter to set the root directory, which could be accessed remotely. If you do
not specify the root directory, the default \Temp is set.
•
Use Authentication - Use this parameter to enable/disable authorization to connect to the server. If enabled,
a valid user account on the local machine is required and the correct ID and password for the account must
be specified to the server.
•
User Authentication Domain - Valid Windows domain to look for users that are allowed to access FTP
service. The FTP server authenticates user password from this Domain Controller.
•
User List - Use this parameter when the Use Authentication parameter is enabled to set the list of users that
are able to access the FTP server.
NOTE You cannot use FTP to update partitions.
CAUTION Never enable the server in anonymous mode if the MK1200 is accessible from the internet.