Motorola MK1200, Product Reference Manual

Page: 124 / 232

7 - 4 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
User Application Version Reporting
SNMP reports user application names and version information as follows:
Upon boot up, the MK1200 reads a .reg file (e.g., application_name.reg) created and loaded into the Application
partition (folder), and loads its contents into the system registry.
Values under the registry key HKEY_LOCAL_MACHINE\Software\AppVersions represent software components.
Each value/data pair specifies the name of the component and its version, respectively. These values must be
string values.
The Symbol RDM and a number of off-the-shelf SNMP-based network management packages can read
application version information (see Software Version Information under
Monitoring MK1200s on a Network on
page 4-15 ).
For a sample .reg file see the Web Kiosk Software Suite Web_KioskSoftwareSuite.reg file which contains the
following text on two lines:
[HKEY_LOCAL_MACHINE\Software\AppVersions]
"Web_KioskSoftwareSuite"="x.x"
When an MK1200 that contains the Web_KioskSoftwareSuite.reg file in its Application folder (file is present at
bootup) is queried by the RDM for application version information, it returns the application name and version:
web_kiosksoftwaresuite
and
x.x
.
Radio Driver hrInstalledSoftware
Radio Firmware hrInstalledSoftware
Radio Hardware hrInstalledSoftware
N User Application names/versions hrInstalledSoftware
Processor Name/Type hrDeviceTable
RAM Size hrDeviceTable
Flash Size hrDeviceTable
Other devices hrDeviceTable
Partitions - name/size
(Platform, Application, Data, Object Store)
hrPartitionTable
Filesystem Information hrStorageTable
Table 7-2
Reported Software Component Versions (Continued)
Item Host Resource MIB Location
NOTE For tracking purpose
,
it is recommended that the name of the registry setting is the same as the registry
file name.