Motorola MK1200, Product Reference Manual

Page: 87 / 232

Remote Device Manager 4 - 15
•
Check the
Enable auto-refresh every
option to enable automatic refresh/discovery of devices and specify the
time period in its text box. This automatically refreshes the
Discovered Devices
list after a cold/warm boot or
after a configuration file push.
•
In the
Application 1
and
Application 2
fields, enter the names of applications loaded on the device that the
RDM must monitor. For example, to track the Web Kiosk Software Suite version, enter
Web_Kiosk
SoftwareSuite
into
Application 1
.
•
Check
Auto reboot after download
to reboot the device after a successful configuration file push.
•
Check
Device discovery on open
to perform device discovery automatically when the RDM launches.
•
Check
Enable RDM Password
to prompt for a User Name and Password for using the RDM. Enter the user
name and password in the
RDM Login
screen. RDM prompts for the user name and password when
launched.
•
Specify the
Broadcast IP Address
, used in discovering devices on the network. The default value is
255.255.255.255. This causes discovery of all device in all network interfaces attached to a single computer
(multi-homed computer).
3.
Click OK to save the changes and close the
Options
window.
4.
Click Defaults to load the default settings for the RDM.
5.
Click Cancel to exit the
RDM Options
screen without saving the settings.
Monitoring MK1200s on a Network
Use the RDM to remotely monitor MK1200s connected through a network connection. After performing discovery,
double-click on an MK1200 from the discovery list, or click on the MK1200 in the list and select
View > Device
Information
from the RDM menu:
•
View device general information. See Device Information - Info Tab: Detected Device Information on page
4-16 .
•
View software version information, such as applications, drivers, OS, and platform. See Device Information -
Software Tab: Version Information on page 4-17 .
•
View RAM and flash memory usage for the selected device. See Device Information - Storage Tab: Memory
Availability and Usage on page 4-18 .
•
View partition information for the selected MK1200. See Device Information - Partitions Tab on page 4-19 .
Use the up and down arrow keys to navigate through the discovered devices to view information.
Click Refresh to refresh the device properties list.
Click Generate Report to place the information displayed in the tabs into a printable file.