Motorola MicroTAC Select 6000e, Manual

Page: 23 / 78

Making and Receiving Phone Calls
21
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area with PCS service.
• Your Call Forward and Call Barring settings should not be set
to forward or bar incoming calls.
When your phone receives a call, it will ring or vibrate and the
display will show
Answer?
If you have Caller Line Identification
service, the caller’s number will be displayed.
A
As a CLI subscriber, if a phone number match is found in your
phone book or SIM memory, the phone will display the
“name” (or alpha entry) of the incoming caller.
!
It is possible that the Phone Book lookup may take a few
seconds, particularly if both the SIM and Phone Book have
many entries.
Answering a Phone Call
Press
O
or open the keypad cover (unless ‘Key Answer
Only’ is turned on) to answer a call. If the signal strength is weak,
make sure that your antenna is fully extended.
If you receive a call that you do not wish to answer and the
keypad cover is already open, you may:
Press and release
C
. If you have enabled the ‘Detailed
Forward - If Busy’ option in the Options Menu, the caller will
be forwarded to the designated number. Otherwise the caller
will hear a busy tone.
or
Press and hold
C
. This will reject the incoming call. No call
forward option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed.
Ending a Phone Call
Press
O
or close the keypad cover to end a call.