12
SAFETY PRECAUTIONS
These precautions help protect you and your MG8725.
•
Do not put the MG8725 or its power adapter in water because this is a shock hazard.
•
The MG8725 should normally be installed indoors.
•
Your MG8725 should be operated in an environment that’s between 32 and 104° F (0 to 40° C).
•
Your MG8725 should not be in a confined space. There should be room for air flow around the top, front, and
sides of the MG8725.
•
Use your MG8725’s power adapter and a compatible electrical outlet.
•
The coaxial cable’s ground shield is intended to be connected to the building’s Earth ground. Attachment to
Earth ground is typically provided through Xfinity’s installation.
FCC STATEMENT
This device complies with Class B Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:
this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect
the equipment into an outlet on a circuit different from that to which the receiver is connected, and/or consult the
dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
For operation within the 5.15 - 5.25GHz frequency range, it is restricted to indoor operation. This device meets all
the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated within minimum distance 42cm
between the radiator and your body.
DC input connector is center-pin positive polarity.
© MTRLC LLC 2021. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective
owners. All rights reserved.
27825-EL-C
