e
n
o
h
pel
eT
e
ht
g
ni
s
U
23
Cordless Handset Range
When the handset is at standby and out of range of the base, the
icon will disappear and
‘Searching’ will be shown in the display. You will need to move closer to the base to be able to
make and receive any further calls
Redial on the Handset Base
The ‘Redial’ log will store the last 10 numbers (or name if stored in the phonebook) that you
dialled, up to a maximum of 24 digits for each number
.
To dial a number from the Redial log
1
.
Press the ‘Redial’ key
2
.
Use the and keys to highlight the number to dial
3
.
Lift the handset or press the ‘Speaker’ key to make the call
4
.
Replace the handset or press the ‘Speaker’ key to end the call
To save a number to Phonebook from the Redial log
1
.
Press the ‘Redial’ key
2
.
Use the and keys to highlight the number to save
3
.
Press the ‘Menu/OK’ key
4
.
Use the key to scroll down to ‘Save number’
5
.
Press the ‘Menu/OK’ key
6
.
Using the keypad, enter the name for the phonebook entry
.
If you need to delete any
incorrect characters or digits, just press the ‘Cancel’ key
To enter the characters for a name, press the key the required number of times eg: for the letter
‘H’ you would press the number 4 key twice
.
If 2 consecutive characters are on the same key,
enter the first character, then wait for the cursor to move to the right before pressing the key
again to enter the next character. If you need a space, just press the ‘1’.
7
.
Press the ‘Menu/OK’ key again to save the entry
