manualshive.com logo in svg

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Share
Download
Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 51

Chapter 3 Using the MC9500-K

Introduction

This chapter explains the indicators, buttons, status icons, and controls on the MC9500-K, and provides basic 

instructions for using the device.

LED Indicators

The MC9500-K has three LED indicators. The Decode LED indicates scanning status. The Battery Status LED 

indicates battery charging and health status.The WAN Radio Status LED indicates WAN radio status. 

Table 3-1

 

describes the LED indications.

Figure 3-1

LED Indicators

Table 3-1

LED Indications 

LED State

Indication

Decode LED

Solid Green

Successful decode/capture.

Solid Red

Scanning/imaging in process.

Blinks Red

After the Power button is pressed, turns on and then off to 

indicate that the battery can be removed.

Decode LED

Battery Status 

LED

WAN Radio 

Status LED

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands