Motorola MC909X, Integrator Manual

Page: 50 / 322

2 - 2 MC909X Integrator Guide
Miscellaneous
•
Four Slot Spare Battery Charger charges up to four mobile computer spare batteries.
•
Headphone can be used in noisy environments.
•
Modem Module enables data communication between the mobile computer and a host computer, remotely
through the phone lines, and synchronizes information between the mobile computer and a host computer.
•
Multimedia Card (MMC) provides secondary non-volatile storage. (An SD card may also be used.)
•
UBC adapter charges spare batteries.
•
Wall Mounting Bracket and Shelf Slide can be used for wall mounting applications.
Snap-on Modules
•
MSR connects on to the mobile computer and adds magstripe read capabilities.
•
CAM connects on to the mobile computer and is used to connect cables to the mobile computer.
Both of the snap-on modules use the cables listed below:
•
AC line cord (country-specific) and power supply, charges the mobile computer.
•
Auto charge cable, charges the mobile computer using a vehicle’s cigarette lighter.
•
DEX cable, connects the mobile computer to a vending machine.
•
Serial cable, adds serial communication capabilities.
•
USB cable, adds USB communication capabilities.
•
Printer cable, adds printer communication capabilities.
Keypads
The mobile computer has interchangeable modular keypads. The modular keypads can be changed in the field as
necessary to support specialized applications.
Replacing the Keypad
1.
Press the Power button to suspend the mobile computer.
2.
Remove the two keypad screws. Slide the keypad down and lift up.
NOTE Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the
keypad detached. Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the MMC and
SD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that
the operator is properly grounded.
MC9090 keypads are not interchangeable with MC9060 keypads.