Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz, User Manual

Page: 189 / 252

Accessories 6 - 11
The battery usually charges in less than four hours.
Magnetic Stripe Reader
This section describes how to set up and use the snap-on MSR with the mobile computer. The MSR snaps on
to the bottom of the mobile computer and can be easily removed when not in use.
Figure 6-9
Magnetic Stripe Reader
When attached to the mobile computer, the MSR has the following attributes:
•
Provides power for operating the mobile computer, with the appropriate power connection.
•
Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR data capture
software, visit:
http://devzone.symbol.com .)
Table 6-2
Spare Battery LED Charging Indicators
LED Indication
Off No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Fast Blinking Amber Error in charging; check placement of spare battery.
Slow Blinking Amber Spare battery is charging.
Solid Amber Charging complete.
Card Reader Slot
Latches
Power Port Communications Port
Pogo Pin Pass-through
Connector
Latch Grip
CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See
Appendix C, Regulatory for the power supply regulatory compliance statement.