Motorola MC75A User Manual Download

Page: 34 / 232

2 - 2

MC75A Enterprise Digital Assistant User Guide

Status Bar

The Status Bar at the top of the screen can contain the status icons listed in

Table 2-1

Table 2-1

Status Icons

Icon

Description

Notifications

Backup battery low.

Notification that one or more instant messages were received.

Notification that one or more e-mail/text messages were received.

Notification that one or more voice messages were received.

Speakerphone is on.

There are more notification icons than can be displayed. Tap to display remaining icons.

Indicates a reminder of an upcoming calendar event.

Connectivity

Connection is active.

Connection is not active.

Synchronization is occurring.

Wi-Fi available.

Wi-Fi in use.

HSDPA available. (MC75A6)

3G available. (MC75A6)

GPRS available. (MC75A6)

EGPRS available. (MC75A6)

1xRTT available. (MC75A8)

EVDO Rev. 0 available. (MC75A8)

EVDO Rev. A available. (MC75A8)

Dormant State - no data transmission during a 1x or EVDO connection. (MC75A8)

Battery

Audio

WAN

Connectivity

Notifications

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands

Motorola MC75A, User Manual

Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands