Motorola MC7090CN User Manual Download Page 25

Page: 25 / 130

Chapter 2

Using the MC70

Chapter 2

Using the MC70

Introduction

This chapter explains the buttons, status icons, and controls on the EDA, and provides basic instructions for
using the EDA, including powering on and resetting the EDA, and entering and capturing data.

Status Icons

The navigation bar at the top of the screen can contain the status icons listed in

Table 2-1

Table 2-1

Status Icons

Icon

Function

Description

Speaker

All sounds are on.

All sounds are off.

Vibrate is on.

Battery

Backup battery is very low.

Main battery is charging.*

Main battery is low.

Main battery is very low.

Main battery is full.*

Connectivity

Connection is active.

Synchronization is occurring.

Time and Next

Appointment

Displays current time in analog or digital format.

Multiple Notifications

There are more notification icons than can be displayed. Tap to display

remaining icons.

* Only appears in the

Time and Next Appointment

dialog box.

Summary of Contents for MC7090CN



































































































































Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands

Motorola MC7090CN, User Manual

Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands