Motorola MC67 User Manual Download

Page: 153 / 224

CHAPTER 10

ACCESSORIES

Introduction

MC67 accessories, listed below, provide a variety of product support capabilities.

Accessories

Table 10-1

lists the accessories available for the MC67.

Table 10-1

MC67 Accessories

Accessory

Part Number

Description

Cradles

Single Slot USB Cradle

CRD5500-1000UR

Charges the MC67 main battery and a spare battery.
Synchronizes the MC67 with a host computer through a USB
connection.

Single Slot
Ethernet/Modem/USB
Cradle

CRD5500-1000XR

Charges the MC67 main battery and a spare battery.
Synchronizes the MC67 with a host computer through an
Ethernet, Modem or USB connection.

Four Slot Charge Only
Cradle

CRD5500-4000CR
CRD5501-4000CR

Charges up to four MC67 devices.

Four Slot Ethernet Cradle

CRD5500-4000ER
CRD5501-4000ER

Charges up to four MC67 devices and connects the MC67
with an Ethernet network. CRD5500-4000ER provides up to a
maximum of 100 Mbps. CRD5501-4000ER provides up to a
maximum of 1 Gbps.

Vehicle Cradle

VCD5500-1001R

Installs in a vehicle and charges the MC67 main battery.

Vehicle Holder

VCH5500-1000R

Provides an alternative mounting solution for the MC67 in a
vehicle. Requires the Auto Charge cable for charging the
MC67 battery.

Chargers

Four Slot Spare Battery
Charger

SAC5500-4000CR

Charges up to four MC67 battery packs.

Summary of Contents for MC67

































































































































































































































Search results

Summary of Contents for MC67

Reviews:

Related manuals for MC67

Brands by name

Popular brands

Motorola MC67, User Manual

Search results

Summary of Contents for MC67

Reviews:

Related manuals for MC67

Brands by name

Popular brands