Motorola MC65 User Manual Download Page 133

Page: 133 / 214

CHAPTER 10 ACCESSORIES

Introduction

MC65 accessories, listed below, provide a variety of product support capabilities.

Accessories

Table 10-1

lists the accessories available for the MC65 EDA.

Table 10-1

MC65 Accessories

Accessory

Part Number

Description

Cradles

Single Slot USB Cradle

CRD5500-1000UR

Charges the MC65 main battery and a spare battery.
Synchronizes the MC65 with a host computer through a USB
connection.

Single Slot
Ethernet/Modem/USB
Cradle

CRD5500-1000XR

Charges the MC65 main battery and a spare battery.
Synchronizes the MC65 with a host computer through an
Ethernet, Modem or USB connection.

Four Slot Charge Only
Cradle

CRD5500-4000CR

Charges up to four MC65 devices.

Four Slot Ethernet Cradle

CRD5500-4000ER

Charges up to four MC65 devices and connects the MC65 with
an Ethernet network.

Vehicle Cradle

VCD5500-1000R

Installs in a vehicle and charges the MC65 main battery.

Vehicle Holder

VCH5500-1000R

Provides an alternative mounting solution for the MC65 in a
vehicle. Requires the Auto Charge cable for charging the MC65
battery.

Chargers

Four Slot Spare Battery
Charger

SAC5500-4000CR

Charges up to four MC65 battery packs.

USB Charging Cable

25-108022-01R

Provides power to the MC65 and USB communication with a
host computer.

Summary of Contents for MC65























































































































































































































Search results

Summary of Contents for MC65

Reviews:

Related manuals for MC65

Brands by name

Popular brands

Motorola MC65, User Manual

Search results

Summary of Contents for MC65

Reviews:

Related manuals for MC65

Brands by name

Popular brands