1 - 6
MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Charging the Battery
Charging the Main Battery
Before using the MC55 for the first time, charge the main battery until the amber Charging/Battery Status LED
remains lit (see
for charge status indications). To charge the MC55, use a cable or a
cradle with the appropriate power supply. For information about the accessories available for the MC55, see
.
The MC55 is equipped with a memory backup battery which automatically charges from the fully-charged main
battery. When using the MC55 for the first time, the backup battery requires approximately 40 hours to fully
charge. This is also true any time the backup battery is discharged, which occurs when the main battery is
removed for several hours. The backup battery retains RAM data in memory for at least 15 minutes (at room
temperature) when the MC55’s main battery is removed. When the MC55 reaches a very low battery state, the
combination of main battery and backup battery retains RAM data in memory for at least 48 hours.
For cable and cradle setup and charging procedures refer to the
MC55 Integrator Guide
.
•
USB Charging Cable
•
Charge Only Cable
•
Single-slot USB Cradle
•
Single-slot Ethernet/Modem/USB Cradle
•
Four-slot Charge Only Cradle.
To charge the main battery:
1.
Connect the charging accessory to the appropriate power source.
2.
Insert the MC55 into a cradle or attach to a cable. The MC55 begins charging. The Charging/Battery Status
LED blinks amber while charging, then turns solid amber when fully charged. See
indications.
The 2400 mAh battery fully charges in less than four hours and the 3600 mAh battery charges in less than six
hours.
CAUTION
Ensure that you follow the guidelines for battery safety described in
Battery Safety Guidelines on page
.
Table 1-1
LED Charge Indicators
Charging/Battery
Status LED
Indication
Off
MC55 is not charging.
MC55 is not inserted correctly in the cradle or connected to a power source.
Charger/cradle is not powered.
Slow Blinking Amber
(1 blink every 2 seconds)
MC55 is charging.
Solid Amber
Charging complete.
Note: When the battery is initially inserted in the MC55, the amber LED flashes
once if the battery power is low or the battery is not fully inserted.
Summary of Contents for MC55A0
