button to select the desired camera and press the
on screen and then a flashing battery logo will display for 15 sec. The Blue
Getting Started
13
ENGLISH
When charging
1.
During power OFF, when adapter is plugged in, a adapter logo will display
LED at top left corner light up indicates adapter is plugged in.
2.
During power ON, when adapter is plugged in, the battery icon on screen's
top right corner will show that the battery is charging. The Blue LED at the
top left corner light up indicates adapter is plugged in.
2.4
Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1.
Press the
M
button of the parent unit and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/
add/
view/
scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
add
, and press the
O
button to confirm.
4.
Camera
will pop up, press the
+
UP button or
-
DOWN
O
button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5.
Press the
O
button to confirm.
6.
Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
