12
Getting Started
When charging
1.
If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug
logo will appear on-screen for about 5 seconds, and then a flashing battery
logo will display for 15 seconds. The Blue LED at the top left will light up;
indicating that the adapter is plugged in and charging is continuing.
2.
Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Charging LED at the top left will light up to indicate that the adapter is
plugged in.
2.3
Registration (Pairing)
The Baby Unit is pre-registered to your Parent Unit. You do not need to register
it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1.
Press the
M
button of the Parent Unit and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the
del/
add/
view/
scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
add
, and press the
O
button to confirm.
4.
Camera
will pop up, press the
+
UP button or
-
DOWN
button to select the desired Camera, and press the
O
button to start
searching for a camera unit, with
"press PAIR on cam"
shown.
Note:
If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5.
Press and hold the
PAIR
button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and
PAIR OK
appears on the screen.
The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby
Unit again will cancel its old registration.
+
+
___