UK EN
C. Desktop Mount of Parent Unit
• Flip the stand from Parent rear to open
position for desktop mount.
• Insert the plug of the battery pack into the
socket inside the battery compartment, and fit
the battery pack into the compartment.
• Replace the battery compartment cover, and
pull out the stand (refer to section C).
• Insert the DC plug of the power adapter into
the DC socket in the side of the Parent Unit.
• Connect the other end of the power adapter to
a suitable mains power socket.
• Press and hold the power button to turn the
Parent Unit On or Off.
NOTE:
Only use the power adapter and battery pack provided. The Parent Unit can work with
the power adapter connected but without a battery pack installed. When the Baby
Unit and Parent Unit are both turned on, the Parent Unit should show the colour image
from the Baby Unit camera, but if the room is dark the image will be in black and white
and with a
icon showing, due to the infra-red illumination by the Baby Unit.
