Getting Started
9
ENG
L
ISH
2
the screw in a clockwise direction using a Small cross head or Flat
end screwdriver.
Small cross head or
Flat end screw driver.
2.3
Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event
of a power
1.
Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet. Only use the enclosed power
adapter (6V DC/
2.
Press and hold the
P
POWER ON/OFF button for 1 second to
turn ON the parent unit.
3.
Once the baby and parent units are switched on, the display on the
parent unit will show the video captured by the baby unit.
Place the battery cover over the compartment and gently tighten
failure, or when moving to a different room.
500mA) with the slightly smaller DC plug.
