8
Setting the Alarm
The alarm on your message receiver can be set for a
specific time and date, or it can be used as a daily
alarm.
To set the alarm for a specific time and date:
➊
Press
Á
to display the function menu.
➋
Press
ä
to move the cursor to
Ñ
.
➌
Press
Á
to display the set-time-and-alarm screen.
➍
Press
to move the cursor to
Ö
.
The alarm symbol defines the alarm status -- either
alarm enabled (
c
) or alarm disabled (
Ã
).
➎
Press
ã
to move the cursor to
Ö
.
➏
Press
or
to enable or disable the alarm.
➐
Press
ã
to move the cursor to the hour digit.
➑
Repeat the process for each entry (minute, AM/PM,
and date).
➒
Press
Á
to activate your selection. The
Ö
symbol
is shown on the display.
At the selected time, your message receiver emits a
12-second audible alert even if the message receiver
is in the silent mode.
To set the alarm to alert daily:
Follow the steps previously described, except when
setting the date, press
for the date entries until you
see a blank month, day, and year (--/--/--). The alarm is
now set to alert every day at this specified time.
NOTE: If the alarm expires without being acknowl-
edged, the
Ö
symbol flashes until one of the message
receiver buttons is pressed.
Ñ
22:23ô05/06/96
●
Ã
0:00ô--/--/--
●
SET ALARM
Example of Set-Time-and-Alarm Screen
1027B15.fr5 Page 8 Thursday, December 5, 1996 09:56
