Motorola LX2 plus, User Manual

Page: 16 / 24

Out Of Range Indication
Whenever you are too far away from your paging system`s trans-
mitter to reliably receive messages, your pager displays the Out Of
Range symbol
1
and a Out Of Range alert is started. If you do not
recognize the alert (you do not press any button) there will be a
repetition in regular intervals and the Out Of Range symbol
1
flashes.
Setting The Clock
Whenever you turn your LX2 plus on it shows you time and date.
Setting The Clock is done this way:
1.
Press the Function Button
#
to display the function menu.
2. Move the cursor until the Set Time symbol
W
flashes using
the
!
and
"
buttons.
3. Press the Function Button
#
to display the Set Time screen.
4. Now set the time exactely. The cursor flashes in the hour
position. Change the hour value using the
!
button. Press
"
to move over to the next field (minute) and set the right
value (
!
button). Repeat the procedure for each time field.
To escape from any field without making changes press
(
.
5. Press the Function Button
#
to iniate your changes.
Setting The Alert Pattern
You can choose the one (out of 16) alert pattern that you like most
and that shall be audible when a message is received.
1.
Press the Function Button
#
to display the function menu.
2. Press
!
or
"
until the Set Alert
C
symbol flashes.
3. Press
#
to display the Set Alert screen.
4. Using the buttons
!
and
"
choose the alert pattern you like
most. The number of the chosen pattern flashes („1..16“
selectable pattern, „
C
“ pattern fixed by programming), the
selected alert plays through the internal speaker. To escape
without making changes, press
(
.
5. Confirm your selection by pressing the
#
button. The
selected alert plays through the internal speaker.