Motorola LEX L10ig User Manual Download Page 122

Page: 122 / 194

Figure 48: Channel Selection Screen

Navigate to the parent folder by tapping on the left corner of the current folder name.

Figure 49: Navigation in the Channel Selection Screen

Select a channel by tapping a channel of your choice.

Return to Process

Collaboration with LMR Radios

on page 119

8.4

Sending PTT Audio

The

PTT

button serves to send audio.

When and where to use:

Follow this procedure to start and stop sending PTT audio on the LEX

device.

NOTICE:

The user can also send audio by pressing and holding the

PTT

button on the Land

Mobile Radio (LMR). In that case, the LEX microphone is used to send audio.

Procedure:

On the LEX device, press and hold the

PTT

button.

MN003477A01-A
Chapter 8: Collaboration with LMR Radios

122

Send Feedback

Summary of Contents for LEX L10ig


































































































































































































Search results

Summary of Contents for LEX L10ig

Reviews:

Brands by name

Popular brands

Motorola LEX L10ig, User Manual

Search results

Summary of Contents for LEX L10ig

Reviews:

Brands by name

Popular brands