Motorola I903, User Manual

Page: 24 / 44

24 Using the Phone
4. When the other handset answers by pressing /
FLASH or /SPEAKER or the wireless headset
answers by pressing , press /BACK to transfer
the call. If the other handset or the wireless headset
does not answer, press /MUTE to talk to your caller
again.
NOTE
You are not allowed to use the wireless headset to initiate an
intercom call.
To transfer the call from handset to wireless headset, you
can also press
on the headset to join the call, and then
hang up the call on handset.
3.14.3 Three-party conference call
1. During an external call, press INT .
- Your caller is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset or
the wireless headset you want to call.
3. Press MENU to call the handset or the wireless headset.
4. When the other handset or the wireless headset
answers the intercom call, press
MENU on the calling
handset to set up the conference call.
5. Press /BACK on any handset to end a three-party
conference call and leave the other handset or wireless
headset engaged with the caller or press
on the
wireless headset to hang up and leave the other
handset engaged with the caller.
NOTE
During an external call, pressing /FLASH or /
SPEAKER on any handset, or pressing on the wireless
headset will join in the call and set up a conference call.
3.15 Setting the dial mode
The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU to select
DIAL MODE
.
3. Press MENU and VOL+ or REDIAL/VOL- to select
TONE
or
PULSE
.
4. Press MENU to save.