24
www.mot.com/iDEN
6.
Select “Exit” to return to the Vibrate Alert menu.
7.
Select “Exit” again to return to the previous mode.
Setting the Ringer Volume
You can adjust the ringer volume for incoming calls. If you have a second phone
line, you must set each line separately. Be sure to select the desired line before
setting the volume.
1.
Press
*
,
#
,
3
,
0
. The “30=Ringer Vol-
ume” screen displays.
The display shows your current ringer volume.
2.
Press the Volume Control buttons on the side of the
phone to listen as you raise or lower the volume. At
the lowest setting, the screen displays “Volume
Silent”.
3.
When you reach the desired level, select “Exit”.
Selecting a Ring Style
Your phone has nine selectable ring styles. Phones with two phone lines can use
the same or different ring styles for each phone line.
Incoming circuit data calls have a unique, preset ring style which you cannot
change.
Setting a Ring Style
1. Press
*
,
#
,
3
,
1
.
1.
The display shows your current ring style.
2.
Select “Ok”.
3.
Press
Q
to scroll through the available Ring
Styles.
4.
To listen to the selected ring style, press the Volume
buttons on the side of the phone.
5.
Select “Ok” to select the Ring Style shown.
To leave the ring style unchanged, select “Cancl”
6.
Select “Exit”.
Setting a Ring Style for the Alternate Line
1.
From the Phone Ready screen, press
M
until you see “Line2”.
2.
Select “Line2”.
3.
Repeat the procedure for "Setting a Ring Style", above.
s
D
f
b
Group/Prvt
Vibe:Off
Exit
On
s
D
f
b
30=Ringer
Volume
Exit
s
D
f
b
31=Set Ring
Style:1
Exit
Ok
s
D
f
b
Ring
Style 4
Cancl
Ok
