Motorola HK250, User Manual

Page: 9 / 72

7 EN Advanced
Note: After 1 minute on a call, or 20 minutes of
inactivity, the light stops flashing to save battery power,
but the headset stays on.
Settings
Press and hold the Call button and turn the headset
on. Follow the voice prompts to change these settings:
• Reset to factory default
Note: This removes all pairing information stored in
your headset.
• Voice interface
• Caller ID
• Multipoint (two phone) connections
• W BS (wide-band audio for better sound)
quick red flash in a low battery state
status light headset