15
Tips and tricks
Restore to factory settings
Caution:
This action erases all pairing information stored in your
headset.
To restore your headset to original factory settings, with the headset
turned on, press and hold both Volume buttons and Call button for
10 seconds until you hear
“welcome to the Motorola H17”
(only
with voice prompts ON) or see the indicator light steady lit in blue.
Troubleshooting
My headset will not enter pairing mode
Make sure that any devices previously paired with the headset are
turned off. If the indicator light is not steadily lit in blue, turn off both
the other device and headset, wait for 10 seconds, then turn the
headset back on. Wait until you hear
“ready to pair”
(only with voice
prompts ON) or see the indicator light steadily lit in blue.
My phone doesn’t find my headset when searching
Make sure the indicator light on your headset is steadily lit in blue
when your phone is searching for devices. If not, press and hold the
Call button and both Volume buttons until you hear
“welcome to the
Motorola H17”
(only with voice prompts ON) or see the indicator
light steadily lit in blue.
Summary of Contents for H17txt
