Motorola GP140 Series, Basic Service Manual, Page: 31 / 46

Test Equipment 3-17
11.0 Test Equipment
Table 3-2 lists test equipment required to service the GP100 Series Radios and other two-way radios.
Table 3-2 Recommended Test Equipment
Motorola
Part No.
Description Characteristics Application
R2600CNT Comms System
Analyzer (non
MPT) This monitor will
substitute for items with
an asterisk * Frequency/deviation meter
and signal generator for wide-
range troubleshooting and
alignment
R2600ANT Comms System
Analyzer
(MPT1327) to be
ordered with
RLN1022A (H/W)
RLN1023A (S/W) This monitor will
substitute for items with
an asterisk * Frequency/deviation meter
and signal generator for wide-
range troubleshooting and
alignment
*R1072 Digital Multimeter Two meters recommended for
AC/DC voltage and current
measurements
*S1053,
*SKN6009,
*SKN6001 AC Voltmeter,
Power Cable for
meter, Test leads
for meter 1 mV to 300 V,
10 Megohm input
impedance Audio voltage
measurements
R1094 Delay
Oscilloscope 20 MHz bandwidth,
5 mV/cm - 20 V/cm Waveform measurements
*S1350,
*ST1215 (VHF)
*ST1223 (UHF)
*T1013 Wattmeter,
Plug-in Elements
(VHF & UHF), RF
Dummy Load 50-Ohm,
±
5% accuracy
10 W, max. 0-1000
MHz, 300 W
Transmitter power output
measurements
S1339 RF Millivolt Meter 100
m
V to 3 VRF,
10 kHz to 1.2 GHz
RF level measurements