Motorola GMLN1040 User Manual Download Page 4 | Manualshive

Page: 4 / 28

Motorola GMLN1040 User Manual Download Page 4

2

The Digital Car Kit with Digital Signal Processing (DSP), provides
enhanced audio quality even when driving at high speeds due to the
following features:

•

Full duplex operation permits two way audio to occur in Phone
mode. For more information refer to radio user manual.

•

Noise cancellation filters out ambient vehicle and road noise.

•

Echo cancellation minimises echo from your own voice in the system.

This Digital Car Kit is comprised of the following parts:

Radio cradle including battery charger, keys and interface cable
(GMLN1038). The Mounting Bracket is part of the cradle.

1.

RF Antenna Adapter with Mounting Tool (GMLX1037)

2.

Junction Box incl. mounting screws (GMLN1031).

3.

Power Cable (GMKN4135).

4.

Remote Directional Microphone (GMMN4065).

5.

Accessory Mounting Bracket (GMLN1039)

6.

Accessory Connector Kit (GMBN1021)

7.

Radio side connector Dust Cover (1586499Z01)

8.

Installation Manual (6866535D10).

9.

User Guide (6866535D09).

10. Passive Remote Speaker 5W (GMSN4078) or 10W (GMSN4066).

11. Remote PTT (RLN4857) or Footswitch with Remote PTT

(RLN4856) or Gooseneck with Remote PTT (RLN4858).

12. External antenna (FAE5521, FAE6003 or HAF4002).

Other available accessories are:

13. Handset (GMUN1006)

14. Fist Microphone (GMN4063)

15. TELCO Cable Extension (GMKN4106). This cable extension is

required to connect a Handset or a Fist Microphone.

16. Emergency Footswitch (RLN4836)

17. External Alarm Relay (GKN6272)

«
...
2
3
4
5
6
...
»

Summary of Contents for GMLN1040





























Reviews:

No comments