Motorola FX7400 Series, Integrator Manual

Page: 85 / 116

Troubleshooting 6 - 3
The user name has already been
used. The User Name is
duplicated when adding a
new user to the user
registry. Retype a new User Name.
Not a legal IP address (1.0.0.0 -
255.255.255.255).
Cannot reach the specified IP
Address.
The SNMP Host Link is not valid. The IP address entered is
either formatted inaccurately
or cannot be accessed
(pinged). Accurately retype the IP address, and make sure
the Host device is connected and online. If this is
not successful, contact Service (see
Service
Information on page xi )
Invalid network mask. The network mask entered
is not formatted correctly. Confirm the correct network mask from network
administrator and type it in correctly.
Invalid SNMP version number. The version number for
SNMP protocol is not a
supported version. Use version number 1 for SNMP version 1, and 2
for SNMP version 2c.
Invalid Description. The description contained
invalid characters (<,>,or'). Correct the description.
Invalid Password. 1. The password does not
match the current user
registry (may be illegal
characters, too long, or too
short.)
2. User forgot the password. 1. Accurately retype the password.
2. Contact Service (see Service Information on
page xi )
Name has already been used.
Serial Number has already been
used.
IP Address has already been used. The Name, Serial Number,
or IP Address entered
already exists in the system. Enter a unique value for the new Name, Serial
Number, or IP Address.
Select an item from the list. The system requires that an
item must be selected from
the list box before
continuing. Select an item from the list box, and then continue.
Last command is still pending. Try
again later. The system has not
completed processing the
previous command. Wait a few moments for the previous command to
complete, before sending another command.
Another Administrator is currently
logged in. Try again later. The system will not allow
more than one Administrator
to log in at a time. Wait until the other Administrator logs out (or
times-out) before logging in.
Backup configuration file does not
exist. The system cannot revert to
a backup of the current
configuration unless a
backup file exists. Commit the new configuration to create a backup
file.
Table 6-1
Troubleshooting (Continued)
Problem Possible Causes Possible Solutions