background image

38     MW800 CPU Owner’s Manual                                                                                                                                                                                               

Appendix B:  Warranty Information 

EPS – 34440- B 

This  warranty  applies  within  the  fifty  (50)  United  States,  the  District  of  Columbia  and 
Canada. 
 

LIMITED WARRANTY 
MOTOROLA COMMUNICATION PRODUCTS 

If the affected product is being purchased pursuant to a written Communications System 
Agreement  signed  by  Motorola,  the  warranty  contained  in  that  written  agreement  will 
apply. Otherwise, the following warranty applies. 
 
I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: 
Motorola  Inc.  or,  if  applicable,  Motorola  Canada  Limited  ("Motorola")  warrants  the 
Motorola  manufactured  radio  communications  product,  including  original  equipment 
crystal devices and channel elements ("Product"), against material defects in material and 
workmanship under normal use and service for a period of One (1) Year from the date of 
shipment. Motorola, at its option, will at no charge either repair the Product (with new or 
reconditioned  parts),  replace  it  with  the  same  or  equivalent  Product  (using  new  or 
reconditioned Product), or refund the purchase price of the Product during the warranty 
period  provided  purchaser  notifies  Motorola  according  to  the  terms  of  this  warranty. 
Repaired  or  replaced  Product  is  warranted  for  the  balance  of  the  original  applicable 
warranty period. All replaced parts of the Product shall become the property of Motorola. 
This express limited warranty is extended by Motorola to the original end user purchaser 
purchasing  the  Product  for  purposes  of  leasing  or  for  commercial,  industrial,  or 
governmental use only, and is not assignable or transferable to any other party. This is the 
complete  warranty  for  the  Product  manufactured  by  Motorola.  Motorola  assumes  no 
obligations  or  liability  for  additions  or  modifications  to  this  warranty  unless  made  in 
writing and signed by an officer of Motorola. 
Unless made in a separate written agreement between Motorola and the original end user 
purchaser,  Motorola  does  not  warrant  the  installation,  maintenance  or  service  of  the 
Product.  Motorola  cannot  be  responsible  in  any  way  for  any  ancillary  equipment  not 
furnished by Motorola, which is attached to or used in connection with the Product, or for 
operation  of  the  Product  with  any  ancillary  equipment,  and  all  such  equipment  is 
expressly excluded from this warranty. Because each system, which may use the Product, 
is unique, Motorola disclaims liability for range, coverage, or operation of the system as a 
whole under this warranty. 
 
II. GENERAL PROVISIONS: 
This  warranty  sets  forth  the  full  extent  of  Motorola’s  responsibilities  regarding  the 
Product. Repair, replacement or refund of the purchase price, at Motorola’s option, is the 
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS 
WARRANTIES.  MOTOROLA  DISCLAIMS  ALL  OTHER  WARRANTIES  OR 
CONDITIONS, 

EXPRESS 

OR 

IMPLIED, 

INCLUDING 

THE 

IMPLIED 

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR  PURPOSE.  IN  NO  EVENT  SHALL  MOTOROLA  BE  LIABLE  FOR 

Summary of Contents for F5207A, F5217A































































Reviews: