Motorola ES400 User Manual Download Page 126

Page: 126 / 212

11 - 6 ES400 User Guide

Figure 11-3

Edit a Fingerprint

To remove a fingerprint tap Remove fingerprint.

Tap Yes and OK to confirm the changes.

Edit Lock Screen Display

To change the information that appears on the Lock screen:

Tap Lock screen options.

Figure 11-4

Lock Screen Options Window

Select items to display on the Lock screen.

Tap OK when done.

Audio Feedback

To enable an audio sound upon a successful finger swipe:

Tap Audio feedback to toggle audio on and off.

Microsoft Locking

Locking the ES400 turns off keyboard and touch screen functionality. This is helpful when the ES400 is turned on
and you want to prevent accidental key presses.

Summary of Contents for ES400





















































































































































































































Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands

Motorola ES400, User Manual

Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands