Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 85 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual Floor Mounting Instructions
Procedure 4-1 How to Install the Cabinet Using the Mounting Brackets
1
Check that the mounting brackets have been correctly positioned in the equipment room, see
Figure 3-2 for MTS 2, Figure 3-4 for MTS 4, and Figure 3-6 for Expansion Cabinet site.
2
Mark and then drill the
fl
oor according to the dimensions shown in Figure 4-4 and Figure 4-5 .
Remember to keep the 13 mm distance behind the mounting plate. In each bracket, a 12 mm
hole is pre-drilled. The front brackets can be placed anywhere around the leveling feet at a
radius of 60 mm or 105 mm (either hidden under the cabinet, or stuck out for easy mounting),
see the circles in
Figure 4-4 and Figure 4-5 .
Figure 4-4 MTS 2 – Drill Hole Position for the Mounting Brackets
6802800U74-N September 2009
4-9