Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 47 / 517

Chapter
2
General Safety
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
■
■
This chapter summarizes the safety related information that you should both understand and observe
when working with Motorola TETRA Stations (MTSs). In addition to the information contained in this
chapter, additional safety related information can be found in other parts of the document.
This is not an exhaustive list of all the precautions and safety measures that should be
observed. Please ensure that all local and site safety measures are implemented before
carrying out any task with the MTS or associated equipment.
For full instructions and guidelines, please always refer to Motorola Standards and
Guidelines for Communications Sites, R56, document.
General Safety
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
This section contains general information related to safety when working with, or operating MTSs.
The MTS 4 is intended to be installed in restricted access locations, as de
fi
ned
in EN/IEC 60950-1, and only to be used by service personnel, or by users with
appropriate technical experience and training.
The MTS 2 is intended to be installed in restricted access locations, as de
fi
ned
in EN/IEC 60950-1, and only to be used by service personnel, or by users with
appropriate technical experience and training.
6802800U74-N September 2009
2-1